Dual plate check valve with plates in ductil iron and flap gate in cast iron.
Dual plate check valve ranges from DN 50 to DN 300.
Dual plate check valve with plates in ductil iron and flap gate in cast iron.
Dual plate check valve ranges from DN 50 to DN 300.
– Wafer body desing rugged and easy to handle.
– Nickel plated plate surface or St. Steel.
– Integral rubber facing gaskets, no need to use additional gaskets.
– Unidirectional Design (observe direction of arrow on valve commissioning).
– Standard Design pressure: PN16 (PN10 from DN 350 onwards), PN10 (DN 350-600)
– Size range: DN50-600.
– Standard installation between flanges EN 1092 PN 10-16 other flange standard on request.