Centaurus, are smart water meters composed of a mechanical body which includes the measuring chamber through which the water flows, and an electronic indicator with integrated LCD display and communications included (Nb-IoT, Cat M1, GPRS) being IP68 watertight.
They have CE marking, being in accordance with the Directives that apply to them and having their EU Type Examination Certificates as equipment suitable for placing on the market for the measurement of clean water.
CENTAURUS records water consumption in real time. Access data recorded by daily, weekly or monthly patterns through our SOFTWARE solution.
Receive alerts of leaks, tampering or blockage just in time. CENTAURUS sends an instant alert for immediate action. Thanks to its high accuracy, even the smallest leaks are now detectable. Avoid unnecessary waste thanks to predictive maintenance.
Our SOFTWARE solution includes DMA performance analysis. Access a daily updated HYDRO BALANCE of your network.
The smart water meter designed by HIDROCONTA in Europe.
Hidroconta’s Centaurus water meter has the metrological requirements based on Directive 2014/32 / EU, so they are normally used for the totalization and control of domestic water consumption. In Hidroconta we perform strict tests on the water meters that ensure their quality and accuracy.
Reverse flow detection. If there is flow in the reverse direction the alarm is triggered.
Set the amount of liters to trigger the alarm.
Occurs when constant flow rate is higher than a specific flow (time and flow are customizable values).
HIDROCONTA recommends to set it up 0.5% Q3.
Occurs if the detected flow rate is zero for a certain period of time (customizable).
Occurs when the average flow rate is higher than a custom value during a certain customizable period of time.
Occurs when the average flow rate is lower than a custom value during a certain customizable period of time.
Occurs when a customized constant flow rate is higher than a specific flow for a short period of time.
HIDROCONTA recommends to set it close to Q3.
Occurs when an instant flow rate is higher than a custom flow value.
HIDROCONTA recommends to set it close to Q4.
